by marlan99 » 11 Feb 2013, 14:50
Hi Yuretz,
thank you for the suggestions but it does not work.
1. Display says "no Nav available"
2. Display says "no Nav available"
3. Tested with PAL and NTSC Source. Same result
So when the GVIF is powerd an i can see and use the Original Navigation, the Cables are connected correctly.
I tried some different DIP Switch positions. At last i stayed with ON, ON, ON, ON, OFF, ON, ON, OFF.
This means for me all Sources are disabled (except CVBS4 for the Rear Cam with switch 7)
Switch 5 means used for Range Rover and Switch 6 means used with original Navigation.
When i try one of the Input AV1 - AV3 there are some disturbing colors (white with some colored lines) and when i power off the Cam the screen stays black.
Any other hint for the Dip Switch positions or the other Cables to use?
Otherwise it seems to be that this GVIF is not working.
regards
Marcel