Car Video Interface for Audi A6,A8,Q7 MMI Touchscreen

[Stanley]

will this work for my 2009 audi s5 with mmi 2g HIGH with NO navagation?

-oelectro

[Stanley]

here I send you picture of my audio system

Waiting for answer

-oelectro

[mikeng]

I can't see your picture:(

[Stanley]

And can you send me a picture of what the connector should look like?

ok, and 1 more question, i have a aftermarket screen, and it auto switches to the 2nd video source when it senses it being present, so i have my backup camera so it only tuinrs on when in reverse. Does you unit have a hookup wire that i must attach to the backup light, or does it also just turn to the reverse camera video source when it senses a signal?

-oelectro

[Stanley]

and 2more questions:
1. Is it possible for one of the buttons to switch the input, or only a dip switch of remote
if its only a dig/toggle switch can you send me a photo of what it looks like
2. There are 3 inputs?

[mikeng]

For reverse camera we have wire

For switch input, we have button, or remote control, or touch support

[Stanley]

My car 2009 audi s5 with mmi 2g HIGH with NO navagation
I bought interface:
Video Interface for Audi A4, A5 with Touchscreen Support
would you explain please how to install this interface into my car?
you have already sent the manual....but it does not mention anything to where these wires go to
what are the following wires supposed to be hooked up to:
-Safe
-Can-L
-Can-H
-F-Cam-DET

besides the questions...i just need clearification on the front camera....because the backup camera for example...you hook up that wire so that it auto switches to that video input when the reverse lights are activated.....but for a font camera....if this switch is wired will it always show a cirtain input on the screen....so if i only want the front camera on sometimes....would i want to hook up a on/off switch?

[Stanley]

Dear car-solutions,

Will this work in my NON-Touch screen MMI screen? 2006 A6 3.0?

-2010kras

[mikeng]

Thank you for the questions
About wires
1)safe - connect it's with ground wire
2)can-l connect to can-l wire of your car
3)can-h connect to can-h wire of your car
2 and 3 not available when you not have "NAVI" button on console

You can choose front camera by remote or button and switch off it when tou want see other source